- Industrial coatings
- Silicone rubber for molds
- Silicone anti-adhesives
- Silicone lubricants
- Silicone lacquers
- Silicone vaseline
- Anticorrosive zinc silicate primer
- Textile impregnation
- Car Wash
- Natural Rubber
- Textile auxiliaries
- Personal Care for Hair Salons
- Medical Cosmetics
- Other products and raw materials
Silicone paste with high hardnessThe Silicon rubber paste Silast D-2 is a two-component composition. It is hardened ( cured ) at room temperature - RTV curing.
Component 1: Polydimethylsiloxane polymer , fillers and plasticisers.
Component 2: Curing agent - K 168
The paste is ideal for making moulds for concrete and cement.
This silicone rubber is used fround coating of horizontal and vertical construction joints, walls and other holes.
Component 1 (silicone paste Silast D-2) is mixed with component 2 (cured K168 or K168 A) in a ratio 100:5 parts by weight at room temperature.
1 and 2 components may only be used together if they have the same batch number.
Before application pastes are mixed with hardening agent К 186 at room temperature, as a result of which they vulcanize up to elastic rubber-like mass. The vulcanizate endures weather conditions (moisture, ozone, UV rays, temperature), vibrations and bending at a wide temperature range of -40 to +180 0С.
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.